P.O. Box 368, Union, NJ 07083-0368, 908-687-7810, 800-327-2443, Fax: 908-687-8860

Download printable PDF version

Photo Controls for Low Voltage Lighting Systems

Part# 270K4021
(Fixed Mount)
 
Part# 270K4221
(Swivel Mount)
 
Plug for
270K4221P
 
1.0 SCOPE
  These devices are designed to fit into low voltage lighting transformers, standard outlet boxes, post lamps, or wall packs.
 
2.0 FEATURES
  2.1 The fixed-mount version is equipped with a 3/8"-18 threaded side mounting, locking nut, and washer gasket. Lead length is 11". Paige Electric part number 270K4021. (50/case)
  2.2 The swivel-mount unit allows turning and adjusting of position relative to the sun rays. It also includes a sliding shield for adjustment of light sensitivity. Equipped with 1/2"-14 threaded stem, washer gasket, and locking nut. Lead length is 15". Paige Electric part number 270K4221. (50/case)
  2.3 The swivel-mount with plug fits several manufacturers’ transformer. It allows for fast connection and replacement of the photo control. Lead length is 15". Paige Electric part number 270K4221P. (50/case)
 
3.0 LISTINGS
  3.1 Listed under UL 773A
  3.2 Complies with the requirements of UL Standard "UL1838 - Low Voltage Landscape Lighting Systems, Appendix A."
 
4.0 ELECTRICAL CHARACTARISTICS
  4.1 120VAC, 50/60Hz
  4.2 1800VA Tungsten
  4.3 8.3Amps Ballast
 
5.0 INSTALLATION TIPS:
  5.1 For best results, position the photo control so it faces the north. If installed on the south side of a building, point the photo control to the east or west or towards the ground.
  5.2 Adjust the sensitivity to sunlight with swivel and metal shield, if applicable.
 
6.0 WIRING DIAGRAM Wiring Diagram 7/20/2010