| 1.0 |
SCOPE: |
|
1.1 |
The 3M™ Direct Bury Splice Kit
DBR/Y is used to electrically connect
two or more pre–stripped copper
wires and moisture seal the connection
for direct burial. It includes
the 3M R/Y+ Electrical Spring
Connector and a high impact,
UV-resistant polypropylene tube prefilled
with moisture-resistant gel. It is
ideal for splicing wires and cables in
irrigation and Low Voltage Lighting
systems. For residential, commercial,
golf, and other green industry
applications. |
|
|
|
| 2.0 |
PACKAGING DETAILS: |
| Paige Part Number |
270670 |
270671 |
| 3M Part Number |
DBR/Y Bulk |
DBR/Y Kit |
| Description |
Bulk pack of 100 each gel-filled tubes and twist-on
connectors. |
25 Kits in a plastic bag. 2
gel-filled tubes and 2 twist-on
connectors per bag. |
| Case Data |
Weight |
5.1 lbs
2,3 Kg |
3.5 lbs
1,6 Kg |
| Dimensions |
14.25 x 7.625 x 7.5 inches
36 x 19 x 19 cm |
13 x 7.6 x 6 inches
33 x 19 x 15 cm |
Pallet
Data |
Quantities |
75 cases
7,500 tubes |
133 cases
6,650 tubes (3,325 kits-of-2) |
| Weights |
402 lbs
183 Kg |
485 lbs
221 Kg |
| Dimensions |
48 x 42 x 43 inches
122 x 107 x 109 cm |
48 x 42 x 47.5 inches
122 x 107 x 121 cm |
| Volume |
50.2 ft³
1,42 m³ |
55.4 ft³
1,57 m³ |
|
|
| 3.0 |
FEATURES: |
| |
3.1 |
Reduces inventory and SKUs: |
|
|
Designed to replaces the following 3M connectors:
DBY, DBR, DBY-6, DBR-6, DBY-Kit,
DBR-Kit, DBY-6-Kit, DBR-6-Kit. Reduces the
SKUs from 8 to 2 (DBR/Y and DBR/Y Kit.) |
|
|
|
|
3.2 |
Rated for 600 volts: |
|
|
One connector for most connections
required in irrigation (conventional
and decoder types) and landscape
lighting systems. |
|
|
|
|
3.3 |
Bulk or Kits-of-two connectors: |
|
|
Each waterproof connector includes the
R/Y+ twist-on connector (wire nut*),
and a gel-filled tube |
|
|
|
|
3.4 |
Water Resistant & Rain Tight: |
|
|
The DBR/Y may be installed above or
below ground, inside a “valve box” or
buried next to a valve-in-head sprinkler
or light fixture. |
|
|
|
|
3.5 |
Sunlight resistant: |
|
|
Connector can be used above or
below ground level. |
|
|
|
|
3.6 |
Strain relief: |
|
|
The gel-filled tube includes a lid that
compresses the wire insulation when
closed. This applies a pressure, known
as “strain relief” that keeps the connection
inside the tube when the wires are
pulled-upon. The connector tube
includes channels for three sets of wires. |
| |
|
|
| |
3.7 |
Operating temperature: |
| |
|
-40°F to 221°F (-40°C to 105°C) |
| |
|
|
| |
3.8 |
Made in the USA by the 3M Company: |
| |
|
Unquestioned quality by a name you
can trust! |
|
| Metric Wire Combination |
| Cross section capacity |
2,0 mm² through 16,0 mm² |
| Quantity |
Size |
Type |
| 5 - 7 |
0,5 mm² |
sol/str. |
| 3 - 7 |
0,75 mm² |
sol/str. |
| 2 - 8 |
1,0 mm² |
sol/str. |
| 2 - 7 |
1,5 mm² |
sol/str. |
| 2 - 5 |
2,5 mm² |
sol/str. |
| 2 - 4 |
4,0 mm² |
sol/str. |
| 2 |
6,0 mm² |
sol/str. |
| * Only AWG wire size combinations are UL
LISTED or CSA Certified. |
|
|
|
